A 8-12 meter long arm barrier gate is typically used in applications where a wide entrance or exit needs to be controlled. These long-arm barriers are commonly found in places requiring high clearance, wide lanes, or heavy-duty access control. Here are some key applications:   1. Truck & Container Terminals     - Ports & Shipping Yards: Controls entry/exit of lar...

  A loop detector (or inductive loop detector) is a sensor used to detect the presence of a vehicle, typically installed in the ground near a barrier gate (such as in parking lots, toll booths, or secured entry points). Here’s how it works in conjunction with a barrier gate:   1. Loop Detector Basics    - The loop detector consists of a coiled wire loop embedded in the ro...

Boom barriers (or toll barrier gate) are equipped with multiple safety features to prevent accidents, protect vehicles, and ensure smooth operations. Here are the key safety mechanisms commonly found in barrier gates:     1. Auto-Retraction Mechanism     - If the barrier arm detects an obstacle (like a vehicle or person) while closing, it automatically stops and rever...

  Purchasing a barrier gate (also known as a boom barrier or automatic gate) involves several steps, from assessing your needs to installation and maintenance. Here’s a step-by-step guide to help you buy the right barrier gate:   1. Determine Your Requirements    - Purpose: Is it for parking lots, residential complexes, toll booths, or industrial areas?    -Traf...

    A ticketing parking system is a type of parking management system that uses tickets to control access and exit from a parking facility. Here's how it typically works:   1. The driver enters the parking facility and takes a ticket from a ticket dispenser or attendant. The ticket contains information such as the date, time, and location of the parking space.   2. The driver p...

  A boom gate is typically designed to automatically open in the event of a power outage or failure. This is done to ensure that people can safely exit a facility or area, even if the electrical system fails.   Most boom barrier gates are equipped with a auto-open module which makes barrier gate automatically open if power is off. This allows the gate to continue automatic opening when t...

  Photocell are sensors that detect light. When they are used with barrier gates, they work by triggering the gate to open or close when a certain level of light is detected.    Here's how it works:   1. When the photocell is exposed to light, it generates an electrical signal. 2. This signal is sent to the control unit of the barrier gate. 3. The control unit then activates th...

    There are several ways to control a parking barrier gate using a cellphone:   1. Using a mobile app: Many barrier gate manufacturers offer mobile apps that allow you to control the gate from your smartphone. These apps typically use Bluetooth or Wi-Fi to connect to the gate and allow you to open, close, and monitor the gate remotely.   2. Using a smart home system: If your ...

  The function of anti-hit of barrier is very important, it can protect vehicle or person no to be hit by the boom arm. Normally there are four ways for anti-hit.   Anti-hit by Pressure Resistance Bounce While moving down, boom arm will immediately go back to vertical position once it is obstructed by an imposed force, which protects the vehicle or person not to be hit by boom arm. It is...

  There are different types of boom barrier gate with different arm and speed etc. As the owner of a parking lots, you have to choose the right parking barrier based on your own requirements. Choosing a proper barrier gate can improve the working efficiency of the entire parking lot, reduce errors and economic losses. Below factors should be considered when you choose a barrier gate.   A...